Insulating Roofs in Historic Buildings
This page provides advice on improving the thermal performance of various forms of roof by adding insulation. Older buildings can have a wide variety of roof forms and materials, often within a single building, each of which may require a different technical solution.
Insulating roofs at ceiling level
For most roofs placing insulation above the ceiling of the top floor can be cheaply and easily achieved without significant modification. High levels of ventilation can usually be achieved which reduces the possibility of any condensation occurring within the cold roof space.
Energy Efficiency and Historic Buildings: Insulating pitched roofs at ceiling level-cold roofsPublished 29 April 2016
This guidance note provides advice on the principles, risks, materials and methods for insulating pitched roofs at ceiling level. When insulation is placed in this position, the roof is often referred to as a ‘cold roof’.
Insulating roofs at rafter level
For buildings with rooms in the roof space, insulation can be added above, between or beneath the rafters or as some combination. However, the design of the building may restrict some of these options.
Adding insulation above the rafters can change the position of the roof covering in relation to abutments and eaves so this needs to be carefully considered.
Energy Efficiency and Historic Buildings: Insulating pitched roofs at rafter levelPublished 30 November 2015
This guidance note provides advice on the principles, risks, materials and methods for insulating pitched roofs at rafter level. When insulation is placed at this position the roof is often referred to as a 'warm roof'.
Insulating flat roofs
Many older buildings have areas of flat roof, typically over extensions or porches. Insulating these areas can in many cases be relatively difficult so care is needed to make sure the work is effective and does not cause problems.
If insulation work is being carried out to the main areas of roof it is important that flat roofed areas are not forgotten.
Insulating dormer windows
Older buildings often have dormer windows which come in a variety of shapes, sizes and materials. If the main roof is being insulated then it is advisable to consider insulating any dormer window which is a part of that roof.
Energy Efficiency and Historic Buildings: Insulating dormer windowsPublished 29 April 2016
This guidance note provides advice on the principles, risks, materials and methods for insulating dormer windows. Dormers come in a large variety of shapes, sizes and materials and can be a particularly difficult element to insulate.
Insulating thatched roofs
Thatch has a much greater insulating value than any other traditional roof covering and therefore adding insulation may not be appropriate or necessary. However, if insulation is added it is important that the material and detailing are compatible with the highly permeable nature of this material.
Open fires, chimneys and flues
Whether used or unused, fireplaces and chimneys can have an important role in improving the energy efficiency of a building. Open chimneys can be sources of useful ventilation but they can often let too much warm air out and cold air in.
Energy Efficiency and Historic Buildings: Open fires, chimneys and fluesPublished 29 April 2016
This guidance note provides advice on how unused or intermittently used chimneys can be made more energy efficient by preventing draughts. Guidance is also included on the use of open fires and wood burning stoves.